The art of protection – inside an F1 helmet factory

An F1 helmet is a remarkable marriage of science and aesthetics.
Constructed using advanced composite materials, including carbon fibre, it must be exceptionally strong while remaining light enough to minimise strain on a driver's neck.
Visors, ventilation systems, fire-resistant linings, communication equipment, a straw-like drinks system and carefully designed retention mechanisms all contribute to its performance.
Today, F1 helmets must withstand a 225g metal projectile fired at 155mph, a 790C flame and substantial impact and crushing tests. It is engineering with virtually no margin for compromise.
Schuberth works closely with motorsport governing body the FIA.
Dall'Oglio says: "There's a constant exchange of information. We are repeating tests on a regular basis. We are also working on the future regulation of the helmets.
"With the tiniest structural or superficial defect, the carbon shell cannot be used. This could be a lamination, a cooking or a tool problem. So it could be over 1,000 euros (£850) in material, and all those hours of work will have become obsolete."
Arai, Bell and Stilo are the three other leading manufacturers of F1 helmets.
Dall'Oglio says: "We all have the same issues, and in the end, we are protecting drivers. So, the responsibility is heavy for all of us.
"It's the fun part to work with the drivers, but it's also a high responsibility."
When I visit, production is paused and the team cluster to solve a problem. Thankfully this happens very rarely - and the majority of helmet shells are taken to the next station: a water-jet cutting system with a "needle" of water slicing through the rock-hard carbon.
It's 4,000 bars of pressure, like a knife through warm butter, to create the narrow visor opening, six centimetres at its highest point.
"It is genius, because you don't use mechanical force on to the helmet," explains Dall'Oglio.
The cut shell is then taken to what they call "the jigsaw" - the assembly point.
Dall'Oglio says: "The outer shell is created of nearly 100 pieces. Now we add another 100 pieces, depending on the type of aerodynamics parts we need to add on. In total, we can say a couple of hundred pieces make a helmet."
Once assembled, the helmet is taken to the driver's designer.
A helmet can be a driver's signature. From Senna's iconic Brazilian colours to Schumacher's Ferrari red, the designs are miniature works of art.
Combining intricate graphics, specialist paintwork and personal touches, each livery tells a story, celebrating a driver's heritage, family or defining moments.
But while fancy designs look fabulous, they can create headaches for the team in Schio.
"A helmet overall weighs about 1.4 kg, depending on the decoration, and aerodynamic specification," says Dall'Oglio.
"We try to work hard to remove like 20, 30 grams from the top-of-the-line helmets, and a driver then adds decoration of 80 or 70 grams. It's always a little bit of a negotiation with the driver and the painter, but in the end, it's their decision."
Dall'Oglio is proud of the company's relationship with Verstappen, who is very good at giving feedback to initiate improvements.
"We continue on cultivating it, of course, but it's like a happy marriage," he says.
The helmets produced by Dall'Oglio, his colleagues, and other firms are extraordinary pieces of design and engineering, but the greatest achievement will never be the paintwork, carbon-fibre finish or name emblazoned across the side.
Thomaso smiles, as he knows. It is the life they help save, and the driver who walks away.