FIA confirms no further ADUO upgrades for F1 power unit manufacturers after third review

Originally published by F1Technical
View original →
10 Nov 2026, 17:01
FIA confirms no further ADUO upgrades for F1 power unit manufacturers after third review
By on

The FIA has confirmed that no additional homologation upgrades will be granted to Formula 1 power unit manufacturers following the third ADUO assessment period of the 2026 season.

Although the performance gaps between manufacturers evolved during the latest review, none of the changes was sufficient to trigger further development allowances.

The Fédération Internationale de l'Automobile (FIA) has announced the results of its third Additional Development and Upgrade Opportunities (ADUO) analysis, covering Races 12 to 18 of the 2026 Formula 1 season.

Introduced as part of the new power unit regulations, ADUO is designed to prevent significant performance disparities between manufacturers from becoming entrenched by providing additional development opportunities to those whose internal combustion engines (ICE) fall sufficiently behind the benchmark.

Following the latest assessment, the FIA confirmed that the relative performance gaps between manufacturers had changed, but none of these developments resulted in additional homologations being awarded.

The outcome follows the second review period, which also concluded without any additional allowances being granted. Consequently, the eligibility established during the first assessment remains unchanged.

After the first review, Mercedes was found to be between 2% and 4% behind the best-performing ICE, making it eligible for one additional homologation upgrade in both 2026 and 2027.

Audi, Ferrari and Honda, meanwhile, were assessed as being more than 4% behind the benchmark and therefore received two additional homologation opportunities for each of those seasons.

The FIA has not disclosed the precise performance index measurements or the gaps between manufacturers, citing the confidential nature of the data.

How does ADUO work?

Standing for Additional Development and Upgrade Opportunities, ADUO is a mechanism introduced in the 2026 Formula 1 Technical Regulations to allow manufacturers to develop their homologated power units beyond the standard restrictions if they fall sufficiently behind their competitors.

The system will operate throughout the 2026-2030 regulatory cycle, with the FIA monitoring the performance of each manufacturer's internal combustion engine across three designated assessment periods per season.

The resulting ICE Performance Index is calculated using several factors, including input shaft torque, engine speed, MGU-K power and a weighting that accounts for the sensitivity of lap time to power differences across measured laps.

Importantly, the assessment focuses exclusively on the ICE rather than the complete power unit. The Energy Recovery System (ERS) remains a crucial contributor to overall power output, meaning the ADUO performance index does not necessarily represent the full performance differences between manufacturers.

The FIA also clarified that factors such as fluid temperatures and external aerodynamic conditions are captured through on-car measurements, without applying a correction methodology to compensate for their influence.

A manufacturer whose ICE falls at least 2% behind the benchmark becomes eligible for additional development opportunities. Those between 2% and 4% behind receive one additional homologation upgrade for the current season and another for the following campaign. Manufacturers falling at least 4% behind are eligible for two additional upgrades in each of those seasons.

However, ADUO opportunities are not automatically cumulative within a season. A manufacturer receives the additional homologations when it first meets the eligibility criteria, rather than accumulating further allowances through subsequent assessment periods.

There is one important distinction concerning the following season: upgrades awarded for the next campaign can be combined with new allowances earned during that season. For example, a manufacturer receiving two additional upgrades for 2027 following a 2026 assessment could receive another two after the first review period of 2027, giving it four additional homologation opportunities during that campaign.

Unused upgrades cannot be carried over indefinitely. Any allowance that is not used by the final round of the season for which it was granted will be forfeited.

Financial advantages and development opportunities

Beyond the additional homologation opportunities, ADUO also provides eligible manufacturers with increased financial and dyno testing allowances, allowing them to allocate more resources to power unit development outside the standard Cost Cap restrictions.

The financial benefits depend on the size of the performance deficit. Manufacturers between 2% and 4% behind the benchmark can receive allowances of up to $3 million per assessment period, increasing to $4.65 million for a deficit of 4-6%, $6.35 million for 6-8% and $8 million for 8-10%.

For manufacturers falling at least 10% behind, the allowance can reach $11 million per assessment period. In 2026, an additional provision also allows such manufacturers to bring forward up to $8 million from future Cost Cap periods to support development activities.

FIA Single Seater Director Nikolas Tombazis previously emphasised that ADUO should not be confused with a Balance of Performance mechanism, as it does not directly alter the performance parameters of competing power units.

"It's important to make clear that ADUO is not a kind of balance of performance mechanism," Tombazis explained.

"A team or manufacturer will not suddenly get greater fuel flow rate or more or less ballast. It is, in fact, a Cost Cap relief mechanism, where a PU manufacturer meeting ADUO criteria during a review period is given an opportunity to develop its engine through a downward adjustment."

"That's not to underestimate it but a manufacturer will still need to make the best engine in order to win. It's not a magic bullet, or like the FIA is handing out brownie points to somebody who's behind, it simply provides them with leeway to develop their power unit within the framework laid out by the Technical Regulations."

Although the ICE performance index determines eligibility, the additional homologation opportunities are not restricted exclusively to internal combustion engine components.

Depending on the regulations, manufacturers can also introduce upgrades to elements of the exhaust system, turbocharger, wastegate, electrical components and sensors, ERS and its cooling systems, MGU-K, control electronics and certain hydraulic functions, fluids and ballast.

FIA confident in ADUO concept despite planned refinements

Nikolas Tombazis expressed confidence in the FIA's assessment process following the third review period, highlighting the extensive analysis undertaken throughout the first year of the system's implementation.

"The FIA has undertaken extensive analysis as part of the review of ADUO this year. Based on the quality of the data and the robustness of the assessment process, we are confident in our findings and the conclusions reached," he said.

The FIA Director of Single Seater also suggested that the initial experience with ADUO had reinforced the governing body's belief in the concept, although further adjustments are being explored to ensure the mechanism remains effective in the coming years.

"The first year of implementation has also reinforced our belief that the ADUO concept is the right one for Formula 1. However, it is important that the system continues to evolve to ensure it remains efficient, relevant and fit for purpose."

"To that end, we have been working closely with the Power Unit Manufacturers and teams to explore refinements to the methodology that will support the continued effectiveness of ADUO in future seasons."

The next ADUO assessment period will begin in 2027 and cover the opening six races of the season, from the Bahrain Grand Prix to the Miami Grand Prix. Its outcome will determine whether any manufacturers qualify for additional development opportunities during the next regulatory cycle.